HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

231
undo info-center diagnostic-logfile frequency
Default
The default saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
freq-sec: Specifies the interval at which the system saves diagnostic logs from the diagnostic log file buffer
to the diagnostic log file, in the range 10 to 86400 seconds.
Usage guidelines
The system saves diagnostic logs in the diagnostic log buffer, and outputs the buffered diagnostic logs to
the diagnostic log file at the specified interval.
Examples
# Configure the system to save diagnostic logs from the diagnostic log file buffer to the diagnostic log file
every 600 seconds.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile frequency 600
Related commands
• info-center diagnostic-logfile enable
info-center diagnostic-logfile quota
Use info-center diagnostic-logfile quota to set the maximum size of the diagnostic log file.
Use undo info-center diagnostic-logfile quota to restore the default.
Syntax
info-center diagnostic-logfile quota size
undo info-center diagnostic-logfile quota
Default
The maximum size of the diagnostic log file is 5 MB.
Views
System view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum size of the diagnostic log file, in MB. The value range is 1 to 10.
Examples
# Set the maximum size of the diagnostic log file to 6 MB.
<Sysname> system-view