HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

243
Usage guidelines
The system first outputs the security logs to the security log file buffer, and then saves the logs in the buffer
into the security log file at the specified interval.
Examples
# Save security logs to the security log file every 600 seconds.
<Sysname> system-view
[Sysname] info-center security-logfile frequency 600
Related commands
info-center security-logfile enable
info-center security-logfile size-quota
Use info-center security-logfile size-quota to set the maximum size for the security log file.
Use undo info-center security-logfile size-quota to restore the default.
Syntax
info-center security-logfile size-quota size
undo info-center security-logfile size-quota
Default
The maximum size of the security log file is 10 MB.
Views
System view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum size of the security log file, in MB. The value range is 1 to 10.
Examples
# Set the maximum size for the security log file to 6 MB.
<Sysname> system-view
[Sysname] info-center security-logfile size-quota 6
Related commands
info-center security-logfile alarm-threshold
info-center security-logfile directory
Use info-center security-logfile directory to configure the directory where the security log file is saved.
Syntax
info-center security-logfile directory dir-name
Default
The security log file is saved in the seclog directory under the root directory of the storage device.