HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

244
Views
System view
Predefined user roles
network-admin
Parameters
dir-name: Specifies a directory by its name, a string of 1 to 64 characters.
Usage guidelines
The specified directory must have been created.
The configuration made by this command cannot survive a reboot. (MSR2000/MSR3000.)
(MSR4000.) The configuration made by this command cannot survive a reboot or an active/standby
switchover.
Examples
# Set the directory to save the security log file as cfa0:/test.
<Sysname> mkdir test
Creating directory cfa0:/test... Done.
<Sysname> system-view
[Sysname] info-center security-logfile directory cfa0:/test
info-center source
Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor } { deny
| level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
Default
Table 55 lists the default output rules. A default output rule specifies whether or not the common logs,
security logs, diagnostic logs, and hidden logs can be output to a specified destination, and if yes, the
lowest level of the output logs.
Table 55 Default output rules
Destination
Source
modules
Common log Security log
Diagnostic
lo
g
Hidden log
Console
All supported
modules
informational Disabled Disabled Disabled
Monitor
terminal
All supported
modules
informational Disabled Disabled Disabled
Log host
All supported
modules
informational Disabled Disabled informational
Log buffer
All supported
modules
informational Disabled Disabled informational