HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

17
Use undo destination ipv6 to remove the destination IPv6 address.
Syntax
destination ipv6 ipv6-address
undo destination ipv6
Default
No destination IPv6 address is configured for the operation.
Views
DNS template view, ICMP template view, TCP template view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the destination IPv6 address for the operation.
Examples
# In ICMP template view, configure the destination IPv6 address for the operation as 1::1.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1
destination port
Use destination port to configure the destination port number for the operation.
Use undo destination port to remove the destination port number.
Syntax
destination port port-number
undo destination port
Default
No destination port number is configured for the operation.
Views
TCP operation view, UDP echo operation view, UDP jitter operation view, voice operation view, DNS
template view, TCP template view
Predefined user roles
network-admin
Parameters
port-number: Specifies the destination port number for the operation, in the range of 1 to 65535.
Examples
# Configure the destination port number for the UDP echo operation as 9000.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo