HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

257
display rtm environment
Use display rtm environment to display user-defined EAA environment variables and their values.
Syntax
display rtm environment [ var-name ]
Views
Any view
Predefined user roles
network-admin
Parameters
var-name: Specifies a user-defined EAA environment variable by its name. If no variable is specified, this
command displays all user-defined EAA environment variables.
Examples
# Display all user-defined EAA environment variables.
<Sysname> display rtm environment
Name Value
config_cmd interface m1/0/1
save_cmd save main force
show_run_cmd display current-configuration
display rtm policy
Use display rtm policy to display monitor policies.
Syntax
display rtm policy { active | registered } [ policy-name ]
Views
Any view
Predefined user roles
network-admin
Parameters
active: Displays policies that are running.
registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If no policy is specified, the command displays all monitor
policies that are running or have been created.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID PolicyName Type Event TimeActive
507 test1 TCL INTERFACE Apr 21 17:45:38 2012
# Display all monitor policies that have been created.