4000 Router Series Network Management and Monitoring Command Reference

Parameters

admin-name operation-tag: Displays the statistics for an NQA operation. The admin-name argument

represents the name of the administrator who creates the NQA operation, and the operation-tag

argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32

characters that cannot contain hyphens (-). If these two arguments are not specified, the command

displays statistics for all NQA operations.

Usage guidelines

The statistics are generated after the NQA operation completes. If you execute the display nqa statistics

command before the operation completes, the statistics are displayed as all 0s.

If a reaction entry is configured, the command displays the monitoring results of the reaction entry in the

period specified by the statistics internal command. If the threshold type is average value or the

monitored performance metric is ICPIF or MOS for the voice operation, the result fields display hyphens

(-).

Examples

# Display the statistics for the TCP operation.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

NO. : 1

Start time: 2007-01-01 09:30:20.0

Life time: 2 seconds

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 13/13/13

Square-Sum of round trip time: 169

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to internal error: 0

Failures due to other errors: 0

# Display the statistics for the UDP jitter operation.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

NO. : 1

Start time: 2007-01-01 09:33:22.3

Life time: 23 seconds

Send operation times: 100 Receive response times: 100

Min/Max/Average round trip time: 1/11/5

Square-Sum of round trip time: 24360

Extended results:

Packet loss ratio: 0%

Failures due to timeout: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packets out of sequence: 0

Packets arrived late: 0

UDP-jitter results: