HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

36
expect ipv6
Use expect ipv6 to specify the expected IPv6 address.
Use undo expect ipv6 to remove all expected IPv6 addresses.
Syntax
expect ipv6 ipv6-address
undo expect ipv6
Default
No expected IPv6 address is configured.
Views
DNS template view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the expected IPv6 address for a DNS echo request.
Usage guidelines
During a DNS operation, the NQA client compares the expected IPv6 address with the IPv6 address
resolved by the DNS server. If they are the same, it considers the DNS server legal.
Examples
# In DNS template view, configure the expected IPv6 address as 1::1.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] expect ipv6 1::1
filename
Use filename to specify a file that the FTP client uploads to the FTP server.
Use undo filename to restore the default.
Syntax
filename filename
undo filename
Default
No file is specified.
Views
FTP operation view, FTP template view
Predefined user roles
network-admin