HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

50
probe packet-timeout
Use probe packet-timeout to configure the timeout time for waiting for a response in the UDP jitter, path
jitter, or voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
Default
The response timeout time in the UDP jitter or path jitter operation is 3000 milliseconds, and the response
timeout time in the voice operation is 5000 milliseconds.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
Parameters
packet-timeout: Specifies the timeout time in milliseconds for waiting for a response in the UDP jitter, path
jitter, or voice operation. The value is in the range of 10 to 3600000.
Examples
# Configure the timeout time for waiting for a response in the UDP jitter operation as 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout
Use probe timeout to specify the probe timeout time.
Use undo probe timeout to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
any NQA template view
Predefined user roles
network-admin