HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

72
[Sysname-nqa-admin-test-icmp-echo] statistics max-group 5
target-only
Use target-only to perform the path jitter operation on destination only.
Use undo target-only to restore the default.
Syntax
target-only
undo target-only
Default
NQA performs the path jitter operation to the destination hop by hop.
Views
Path jitter operation view
Predefined user roles
network-admin
Examples
# Perform the path jitter operation on the destination address only.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type path-jitter
[Sysname-nqa-admin-test- path-jitter] target-only
tos
Use tos to specify the ToS value in the IP packet header of probe packets.
Use undo tos to restore the default.
Syntax
tos value
undo tos
Default
The ToS value in the IP packet header of probe packets is 0.
Views
Any operation view, any NQA template view
Predefined user roles
network-admin
Parameters
value: Specifies the ToS value in the IP packet header, in the range of 0 to 255.
Examples
# Configure the ToS value in an IP packet header of probe packets as 1.