4000 Router Series Network Management and Monitoring Command Reference

NTP commands

display ntp-service ipv6 sessions

Use display ntp-service ipv6 sessions to display information about all IPv6 NTP associations.

Syntax

display ntp-service ipv6 sessions [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

verbose: Displays detailed information about all IPv6 NTP associations. If you do not specify this

keyword, the command displays only brief information about the IPv6 NTP associations.

Examples

# Display brief information about all IPv6 NTP associations.

<Sysname> display ntp-service ipv6 sessions

Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured.

Source: [125]3000::32

Reference: 127.127.1.0 Clock stratum: 2

Reachabilities: 1 Poll interval: 64

Last receive time: 6 Offset: -0.0

Roundtrip delay: 0.0 Dispersion: 0.0

Total sessions : 1

Table 13 Command output

Field Descri

tion

[12345]

• 1—Clock source selected by the system (the current reference source). It has

a system clock stratum level less than or equal to 15.

• 2—The stratum level of the clock source is less than or equal to 15.

• 3—The clock source has survived the clock selection algorithm.

• 4—The clock source is a candidate clock source.

• 5—The clock source was created by a command.

Source IPv6 address of the NTP server.