HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

84
Orgtime: d17cbb21.0f318106 Tue, May 17 2011 9:15:13.059
Rcvtime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Xmttime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000
Roundtrip delay samples: 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Offset samples: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Filter order: 0 1 2 3 4 5 6 7
Total sessions: 1
Table 14 Command output
Field Descri
p
tion
Clock source IPv6 address of the clock source.
Clock stratum
Stratum level of the NTP server, which determines the clock
precision. The value is in the range of 1 to 16. A lower stratum level
represents higher clock accuracy. A stratum 16 clock is not
synchronized and cannot be used as a reference clock.
Clock status
Status of the clock source corresponding to this association:
• configured—The association was created by a configuration
command.
• dynamic—The association is established dynamically.
• master—The clock source is the primary reference source of the
current system.
• selected—The clock source has survived the clock selection
algorithm.
• candidate—The clock source is the candidate reference source.
• sane—The clock source is available for this association.
• insane—The clock source is not available for this association.
• valid—The clock source is valid, which means the clock source
meets the following requirements: it has passed the
authentication and is being synchronized. Its stratum level is
valid, and its root delay and root dispersion values are within
their ranges.
• invalid—The clock source is invalid.
• unsynced—The clock source has not been synchronized or the
value of the stratum level is invalid.
Reference clock ID
• If the reference clock is the local clock, the value of this field is
related to the value of the Clock stratum field:
{ When the value of the Clock stratum field is 0 or 1, this field
displays Local.
{ When the value of the Clock stratum field is 16, this field
displays INIT.
{ When the Clock stratum field has another value, this field
displays the MD5 digest value of the first 32 bits of the IPv6
address. The MD5 digest value is in dotted decimal format.
• If the reference clock is the clock of another device on the
network, this field displays the MD5 digest value of the first 32
bits of the IPv6 address. The MD5 digest value is in dotted
decimal format.