4000 Router Series Network Management and Monitoring Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

100

Clock source: 192.168.1.40

Session ID: 35888

Clock stratum: 2

Clock status: configured, master, sane, valid

Reference clock ID: 127.127.1.0

VPN instance: Not specified

Local mode: client, local poll interval: 6

Peer mode: server, peer poll interval: 6

Offset: 0.2862ms, roundtrip delay: 3.2653ms, dispersion: 4.5166ms

Root roundtrip delay: 0.0000ms, root dispersion: 10.910ms

Reachabilities:31, sync distance: 0.0194

Precision: 2^18, version: 3, source interface: Not specified

Reftime: d17cbba5.1473de1e Tue, May 17 2011 9:17:25.079

Orgtime: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000

Rcvtime: d17cbbc0.b1959a30 Tue, May 17 2011 9:17:52.693

Xmttime: d17cbbc0.b1959a30 Tue, May 17 2011 9:17:52.693

Roundtrip delay samples: 0.007 0.010 0.006 0.011 0.010 0.005 0.007 0.003

Offset samples: 5629.55 3913.76 5247.27 6526.92 31.99 148.72 38.27 0.29

Filter order: 7 5 2 6 0 4 1 3

Total sessions: 1

Table 16 Command output

Field Descri

tion

Clock source IP address of the NTP server.

Clock stratum

Stratum level of the NTP server, which determines the clock

accuracy. The value is in the range of 1 to 16. A lower stratum level

represents greater clock accuracy. A stratum 16 clock is not

synchronized and cannot be used as a reference clock.

Clock status

Status of the clock source corresponding to this association:

• configured—The association was created by a configuration

command.

• dynamic—The association is established dynamically.

• master—The clock source is the primary reference source of the

current system.

• selected—The clock source has survived the clock selection

algorithm.

• candidate—The clock source is the candidate reference source.

• sane—The clock source has passed the sane authentication.

• insane—The clock source has failed the sane authentication.

• valid—The clock source is valid, which means the clock source

meets the following requirements: it has passed authentication

and is being synchronized. Its stratum level is valid, and its root

delay and root dispersion values are within their ranges.

• invalid—The clock source is invalid.

• unsynced—The clock source has not been synchronized or the

value of the stratum level is invalid.