HP MSR2000/3000/4000 Router Series Network Management and Monitoring Configuration Guide

123
To create an RMON history control entry:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter Ethernet
interface view.
interface interface-type
interface-number
N/A
3. Create an entry for
the interface in the
RMON history
control table.
rmon history entry-number buckets
number interval sampling-interval
[ owner text ]
By default, the RMON history control
table does not contain entries.
You can create up to 100 history control
entries.
Configuring the RMON alarm function
Follow these guidelines when you configure the RMON alarm function:
• To send traps to the NMS when an alarm is triggered, configure the SNMP agent as described in
"Configuring SNMP" before configuring the RMON alarm function.
• To create a new event, alarm, or private alarm entry successfully, you must make sure:
{ The entry does not have the same set of parameters as an existing entry.
{ The maximum number of entries is not reached.
Table 8 sho
ws the parameters to be compared for duplication and the entry limits.
Table 8 RMON configuration restrictions
Entry Parameters to be compared
Maximum number
of entries
Event
• Event description (description string)
• Event type (log, trap, logtrap, or none)
• Community name (security-string)
60
Alarm
• Alarm variable (alarm-variable)
• Sampling interval (sampling-interval)
• Sample type (absolute or delta)
• Rising threshold (threshold-value1)
• Falling threshold (threshold-value2)
60
Private alarm
• Alarm variable formula (prialarm-formula)
• Sampling interval (sampling-interval)
• Sample type (absolute or delta)
• Rising threshold (threshold-value1)
• Falling threshold (threshold-value2)
50
To configure the RMON alarm function:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A