4000 Router Series Network Management and Monitoring Configuration Guide

125

Figure 46 Network diagram

Configuration procedure

# Create an RMON Ethernet statistics entry for Ethernet 1/1.

<Sysname> system-view

[Sysname] interface ethernet 1/1

[Sysname-Ethernet1/1] rmon statistics 1 owner user1

# Display statistics collected by the RMON agent for Ethernet 1/1.

<Sysname> display rmon statistics ethernet 1/1

EtherStatsEntry 1 owned by user1 is VALID.

Interface : Ethernet1/1<ifIndex.3>

etherStatsOctets : 21657 , etherStatsPkts : 307

etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34

etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0

etherStatsFragments : 0 , etherStatsJabbers : 0

etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0

etherStatsDropEvents (insufficient resources): 0

Incoming packets by size:

64 : 235 , 65-127 : 67 , 128-255 : 4

256-511: 1 , 512-1023: 0 , 1024-1518: 0

# Get the traffic statistics from the NMS through SNMP. (Details not shown.)

History group configuration example

Network requirements

Create an RMON history control entry on the device in Figure 47 to sample traffic statistics for Ethernet

1/1 every one minute.

Figure 47 Network diagram