HP MSR2000/3000/4000 Router Series Network Management and Monitoring Configuration Guide

152
<IfIndex>2688</IfIndex>
<Description>Ten-GigabitEthernet6/0/2:4
Interface</Description>
</Interface>
<Interface>
<IfIndex>2689</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:1
Interface</Description>
</Interface>
<Interface>
<IfIndex>2690</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:2
Interface</Description>
</Interface>
<Interface>
<IfIndex>2691</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:3
Interface</Description>
</Interface>
<Interface>
<IfIndex>2692</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:4
Interface</Description>
</Interface>
</Interfaces>
</Ifmgr>
</top>
</data>
</rpc-reply>
Example for filtering data by conditional match
Network requirements
Retrieve data in the Name column with the ifIndex value not less than 5000 in the Interfaces table under
the Ifmgr module.
Configuration procedure
# Enter XML view.
<Sysname> xml
# Exchange capabilities.
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>
urn:ietf:params:netconf:base:1.0
</capability>
</capabilities>
</hello>