HP MSR2000/3000/4000 Router Series Network Management and Monitoring Configuration Guide

161
O
p
eration Descri
p
tion XML exam
p
le
get-bulk-config
Retrieves a number of
non-default configuration data
entries starting from the data
entry next to the one with the
specified index.
To retrieve non-default configuration for all interfaces:
<rpc message-id ="100"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0" >
<get-bulk-config>
<source>
<running/>
</source>
<filter type="subtree">
<top
xmlns="http://www.hp.com/netconf/config:
1.0">
<Ifmgr>
</Ifmgr>
</top>
</filter>
</get-bulk-config>
</rpc>
edit-config: merge
Changes the running
configuration.
To use the merge attribute in the
edit-config operation, you must
specify the operation target (on
a specified level):
• If the specified target exists,
the operation directly
changes the configuration
for the target.
• If the specified target does
not exist, the operation
creates and configures the
target.
• If the specified target does
not exist and it cannot be
created, an error message is
returned.
To change the buffer size to 120:
<rpc message-id ="101"
xmlns="urn:ietf:params:xml:ns:netconf:ba
se:1.0"
xmlns:xc="urn:ietf:params:xml:ns:netconf
:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<top
xmlns="http://www.hp.com/netconf/config:
1.0"><Syslog
xmlns="http://www.hp.com/netconf/config:
1.0" xc:operation="merge">
<LogBuffer>
<BufferSize>120</BufferSize>
</LogBuffer>
</Syslog>
</top>
</config>
</edit-config>
</rpc>