HP MSR2000/3000/4000 Router Series Network Management and Monitoring Configuration Guide

34
Task Command
Display history records of NQA operations. display nqa history [ admin-name operation-tag ]
Display the current monitoring results of
reaction entries.
display nqa reaction counters [ admin-name operation-tag
[ item-number ] ]
Display the result of the NQA operation. display nqa result [ admin-name operation-tag ]
Display NQA statistics. display nqa statistics [ admin-name operation-tag ]
Display NQA server status. display nqa server status
NQA configuration examples
ICMP echo operation configuration example
Network requirements
As shown in Figure 7, configure and schedule an ICMP echo operation from the NQA client Device A to
Device B through Device C to test the round-trip time.
Figure 7 Network diagram
Configuration procedure
# Assign each interface an IP address. (Details not shown.)
# Configure static routes or a routing protocol to make sure the devices can reach each other. (Details not
shown.)
# Create an ICMP echo operation and specify 10.2.2.2 as the destination IP address.
<DeviceA> system-view
[DeviceA] nqa entry admin test1
[DeviceA-nqa-admin-test1] type icmp-echo