HP MSR2000/3000/4000 Router Series Probe Command Reference (V7) Part number: 5998-4669 Software version: CMW710-R0007P02 Document version: 6PW100-20130927
Legal and notice information © Copyright 2013 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Contents Common probe commands ········································································································································· 1 display hardware internal dump ····························································································································1 display hardware internal physical ························································································································1 debugging physical card····
Websites································································································································································· 22 Conventions ···································································································································································· 23 Index ························································································································································
Common probe commands display hardware internal dump Use display hardware internal dump to display the dump register information of a chip. Syntax display hardware internal dump if-name [ card ] chip chip-num [ global | channel ] Views Probe view Predefined user roles network-admin network-operator Parameters if-name: Specifies a registered interface or controller by its name. card: Specifies the card system. chip-num: Specifies a chip by its number in the range of 0x00 to 0xFF.
intinfo-priv: Displays private interface information. rxbd: Displays received BD information. statistic: Displays the statistics. txbd: Displays sent BD information. debugging physical card Use debugging physical card to enable debugging for the card system. Use undo debugging physical card to disable debugging for the card system.
Switching module probe commands bcm Use bcm to execute probe commands for a Broadcom chip. Syntax bcm chassis-num slot-num/subslot-num chip-num string Views Probe view Predefined user roles network-admin network-operator Parameters chassis-num: Specifies a chassis by its number, which is always 0. slot-num: Specifies a slot by its number in the range of 0 to 255. subslot-num: Specifies a subslot by its number in the range of 0 to 255. chip-num: Specifies a chip by its number in the range of 0 to 31.
Predefined user roles network-admin network-operator Parameters all: Specifies all submodules of the switching module. acl: Specifies the ACL submodule of the switching module. ioctl: Specifies the ioctl submodule of the switching module. mac: Specifies the MAC submodule of the switching module. mc: Specifies the multicast submodule of the switching module. ni: Specifies the NI submodule of the switching module. port: Specifies the port submodule of the switching module.
Parameters acltable: Specifies the ACL information. boardinfo: Specifies the card information. chipnoinfo: Specifies the chip number information. globalinfo: Specifies the global variable information. debugging: Specifies the debugging information. isolationinfo: Specifies the port isolation information. mactable: Specifies the MAC address entry information. multicasttable: Specifies the multicast entry information. qosinfo: Specifies the QoS information. stpinfo: Specifies the STP status information.
Parameters subslot-num: Specifies a subslot by its number in the range of 0 to 255. vlan-id: Specifies a VLAN by its ID in the range of 0 to 4095. display hardware internal dump lsw mactable Use display hardware internal dump lsw mactable to display MAC address entry information. Syntax display hardware internal dump lsw subslot-num mactable [ all | vlan vlan-id | interface-type { interface-number | interface-number.
chip-num: Specifies the chip number in the range of 0 to 31. debugging physical mgf Use debugging physical mgf to enable debugging for the forwarding card. Use undo debugging physical mgf to disable debugging for the forwarding card. Syntax debugging physical mgf { all | error | event | packet } undo debugging physical mgf { all | error | event | packet } Default Debugging for the forwarding card is disabled.
display hardware internal physical mgf Use display hardware internal physical mgf to display information about the specified interface on the MGF. Syntax display hardware internal physical mgf [ port-num ] { counter | devicemap | rxbd | softinfo | statistic | txbd } Views Probe view Predefined user roles network-admin network-operator Parameters port-num: Specifies a MGF port by its number in the range of 0 to 63.
isolationtable: Displays port isolation group information. qosprofile: Displays QoS configuration information. statistics: Displays statistics. stptable: Displays STP table information. vlanqos: Displays VLAN QoS configuration information. all: Displays information about all entries. cpld: Displays CPLD information. global: Displays global register information. mac: Displays MAC register information. mactable: Displays MAC address table information. vlantable: Displays VLAN entry information.
Related commands display system internal dump poe debugging display hardware internal physical poe debugging Use display hardware internal physical poe debugging to display the enabled PoE module debugging. Syntax display hardware internal physical poe debugging Views Probe view Predefined user roles network-admin network-operator display hardware internal physical poe powerinfo Use display hardware internal physical poe powerinfo to display PoE power information.
display hardware internal physical poe portinfo Use display hardware internal physical poe portinfo to display information about PoE ports in the specified range. Syntax display hardware internal physical poe slot-num start-port<0-63> end-port<0-63> portinfo Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a slot by its number. start-port: Specifies the start PoE port number in the range of 0 to 63.
Interface probe commands display hardware internal physical Use display hardware internal physical to display transmit queues and receive queues on a serial interface. Syntax display hardware internal physical interface-type interface-number { tx_queue | rx_queue } Views Probe view Predefined user roles network-admin network-operator Parameters interface-type: Specifies a serial interface. interface-number: Specifies a serial interface by its number. tx_queue: Displays transmit queues.
display hardware internal dump chassis slot inner-port Use display hardware internal dump chassis slot inner-port to display register information about a specified internal interface or all internal interfaces in a slot. Syntax display hardware internal dump chassis chassis-num slot slot-num inner-port [ inner-port-num ] [ statistics ] Views Probe view Predefined user roles network-admin network-operator Parameters chassis-num: Specifies a chassis by its number, which is always 0.
keyregs: Displays addresses and values of the key registers. priv-info: Displays private information. debugging physical Use debugging physical to enable IPC-related debugging. Use undo debugging physical to disable IPC-related debugging.
Syntax reset hardware internal dump chassis slot slot-num inner-port counter Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a slot by its number in the range of 0 to 255.
Voice probe commands dsp-capture pcm Use dsp-capture pcm to capture DSP PCM packets on a voice interface. Syntax dsp-capture pcm if-name { start | stop } Views Probe view Predefined user roles network-admin network-operator Parameters if-name: Specifies a voice interface. start: Starts capturing packets. stop: Stops capturing packets. Usage guidelines The router can capture DSP PCM packets only on one voice interface.
Usage guidelines The DSP numbers and addresses vary with different voice cards. Use the correct DSP number and address to view DSP memory information. vpm-mirror Use vpm-mirror to mirror the packets between a VPM card and CPU to a specified interface. Syntax vpm-mirror slot slot-num port port-num { all | command | data | stop } to if-name Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a VPM card. port-num: Specifies a VPM interface.
network-operator Parameters if-name: Specifies a voice interface. type: Specifies one of the following debugging types: • all: Specifies all fax debugging.
Main board probe commands display hardware internal pcicfg Use display hardware internal pcicfg to display the contents of the PCI configuration space, including the contents of the PCI-E configuration space. Syntax display hardware internal pcicfg slot-num pci-num bus-num dev-num func-num pci-offset width-num Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a slot number.
Predefined user roles network-admin network-operator Parameters slot-num: Specifies a slot number. It must be 0 for an MSR2000 or MSR3000, and must be in the range of 0 to 2 for an MSR4000. acc-addr: Specifies the hardware space in the range of 0 to 0xFFFFFFFFFFFFFFFF. width-num: Specifies the PCI configuration access bit width in bytes. Valid values include 1, 2, 4, and 8. Usage guidelines This command reads the contents in the specified address space.
Host probe commands display hardware internal cpu-version Use display hardware internal cpu-version to display version information about the CPUs on the host, forwarding cards, and interface cards. Syntax display hardware internal cpu-version Views Probe view Predefined user roles network-admin restore factory-default Use restore factory-default to clear the user information saved the router and interface cards and restore the factory-default configuration.
Support and other resources Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.
Conventions This section describes the conventions used in this documentation set. Command conventions Convention Description Boldface Bold text represents commands and keywords that you enter literally as shown. Italic Italic text represents arguments that you replace with actual values. [] Square brackets enclose syntax choices (keywords or arguments) that are optional. { x | y | ... } Braces enclose a set of required syntax choices separated by vertical bars, from which you select one.
Network topology icons Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. Represents an access controller, a unified wired-WLAN module, or the switching engine on a unified wired-WLAN switch. Represents an access point.
Index BDRSVW display hardware internal physical isrque,12 B display hardware internal physical lsw,4 bcm,3 display hardware internal physical lsw vlaninfo,5 D display hardware internal physical mgf,8 debugging physical,14 display hardware internal physical mgf debugging,7 debugging physical card,2 display hardware internal physical poe,10 debugging physical lsw,3 display hardware internal physical poe debugging,10 debugging physical mgf,7 display hardware internal physical poe portinfo,11 deb
