HP MSR2000/3000/4000 Router Series Security Command Reference

164
[Sysname] pki entity en
[Sysname-pki-entity-en] fqdn [e-mail]
ip
Use ip to configure the IP address for a PKI entity.
Use undo ip to remove the configuration.
Syntax
ip { ip-address | interface interface-type interface-number }
undo ip
Default
No IP address is configured for a PKI entity.
Views
PKI entity view
Predefined user roles
network-admin
Parameters
ip-address: Configures an IPv4 address.
interface interface-type interface-number: Specifies the primary IPv4 address of an interface as the IPv4
address of the PKI entity.
Usage guidelines
Use this command to configure an IP address for a PKI entity or specify the primary IPv4 address of an
interface as the IP address of the PKI entity. In the latter case, you do not need to assign an IP address to
the interface when you execute this command, but you must assign an IP address before the device
requests a certificate.
Examples
# Configure 192.168.0.2 as the IP address of the PKI entity en.
<Sysname> system-view
[Sysname] pki entity en
[Sysname-pki-entity-en] ip 192.168.0.2
ldap-server
Use ldap-server to specify an LDAP server for a PKI domain.
Use undo ldap-server to remove the configuration.
Syntax
ldap-server host hostname [ port port-number ] [ vpn-instance vpn-instance-name ]
undo ldap-server
Default
No LDAP server is specified for a domain.