HP MSR2000/3000/4000 Router Series Security Command Reference

347
Table 48 Command output
Field Descri
p
tion
Application Application protocol using port mapping.
Port Port number to which the application protocol is mapped.
Protocol Transport layer protocol.
Match Type
Match types:
• ---—No match types or match conditions are specified, and all
packets are recognized as the packets of the specified
application protocol.
• IPv4 host—A match based on the destination IPv4 addresses of
the packet.
• IPv6 host—A match based on the destination IPv6 addresses of
the packet.
• IPv4 subnet—A match based on the destination IPv4 subnet of
the packet.
• IPv6 subnet—A match based on the destination IPv6 subnet of
the packet.
• IPv4 ACL—A match based on the IPv4 ACL.
• IPv6 ACL—A match based on the IPv6 ACL.
Match Condition
Match conditions:
• For the match type of IPv4 host or IPv6 host, the destination IP
addresses of the packets are displayed.
• For the match type of IPv4 subnet or IPv6 subnet, the destination
subnet addresses of the packets are displayed.
• For the match type of IPv4 ACL or IPv6 ACL, the correct ACL
number is displayed.
For IP address-based and subnet-based host-port mappings, the
MPLS L3VPN names are displayed if you configured their names.
include application
Use include application to add application protocols to a user-defined application group.
Use undo include application to remove application protocols from the user-defined application group.
Syntax
include application application-name
undo include application application-name
Default
A user-defined application group does not contain any application protocol.
Views
Application group view
Predefined user roles
network-admin