HP MSR2000/3000/4000 Router Series Security Command Reference

378
Connection limit configuration commands
connection-limit apply
Use connection-limit apply to apply a connection limit policy to an interface.
Use undo connection-limit apply to remove the application.
Syntax
connection-limit apply { ipv6-policy | policy } policy-id
undo connection-limit apply { ipv6-policy | policy }
Default
No connection limit policy is applied to an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies the ID of a connection limit policy. The value range for this argument is 1 to 32.
Usage guidelines
Only one IPv4 and one IPv6 connection limit policy can be applied to an interface. A new IPv4 or IPv6
connection limit policy overwrites the old one.
Examples
# Apply the IPv4 connection limit policy 1 to Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] connection-limit apply policy 1
# Apply the IPv6 connection limit policy 12 to Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] connection-limit apply ipv6-policy 12
Related commands
• connection-limit
• limit