HP MSR2000/3000/4000 Router Series Security Command Reference

415
Portal commands
display portal interface
Use display portal interface to display portal configuration and portal running state on an interface.
Syntax
display portal interface interface-type interface-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display portal configuration and portal running state on interface Ethernet 1/1.
<Sysname> display portal interface ethernet 1/1
Portal information of Ethernet1/1
IPv4:
Portal status: Enabled
Authentication type: Layer3
Portal Web server:wbs
Authentication domain: my-domain
Bas-ip: Not configured
User detection: Type: ICMP Interval: 300s Attempts: 5 Idle time: 180s
Action for sever detection:
Server type Server name Action
Web server wbs fail-permit
Portal server pts fail-permit
Layer3 source network:
IP address Mask
1.1.1.1 255.255.0.0
Destination authentication subnet:
IP address Mask
2.2.2.2 255.255.255.0
IPv6:
Portal status: enabled
Authentication type: layer3
Portal Web server:wbsv6