HP MSR2000/3000/4000 Router Series Security Command Reference

32
Parameters
group-name: Specifies a user group by its name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
If no user group name is specified, the command displays the configuration of all user groups.
Examples
# Display the configuration of all user groups.
<Sysname> display user-group
Total 2 user groups matched.
The contents of user group system:
Authorization Attributes:
Work Directory: flash:
The contents of user group jj:
Authorization Attributes:
Idle TimeOut: 2 (min)
Callback Number: 2:2
Work Directory: flash:
ACL Number: 2000
VLAN ID: 2
Password control configurations:
Password aging: Enabled (2 days)
Table 3 Command output
Field Descri
p
tion
Idle TimeOut Idle timeout period, in minutes.
Callback-number Authorized PPP callback number.
Work Directory Directory that FTP/SFTP users in the group can access.
ACL Number Authorization ACL.
VLAN ID Authorized VLAN.
Password control configurations Password control attributes that are configured for the user group.
Password aging
This field appears only when password aging is enabled. The aging time
is displayed in parentheses.
Password length
This field appears only when password length control is enabled. The
minimum password length is displayed in parentheses.
Password composition
This field appears only when password composition checking is
enabled. It also displays the following information in parentheses:
• Minimum number of character types that the password must contain.
• Minimum number of characters from each type in the password.
Password complexity
This field appears only when password complexity checking is enabled.
It also displays the following information in parentheses:
• Whether the password can contain the username or the reverse of the
username.
• Whether the password can contain any character repeated
consecutively three or more times.