HP MSR2000/3000/4000 Router Series Security Command Reference

427
Field Descri
p
tion
URL parameters URL parameters for the portal Web server.
VPN instance Name of the MPLS L3VPN where the portal Web server resides.
Server detection
Parameters for portal Web server detection:
• Detection interval in seconds.
• Maximum number of detection attempts.
• Action (log) triggered by the reachability status change of the portal Web server.
IPv4/IPv6 Status
Current state of the portal Web server:
• N/A—Portal Web server detection is disabled. Reachability status of the server is
unknown.
• Up—Portal Web server detection is enabled. The server is reachable.
• Down—Portal Web server detection is enabled. The server is unreachable.
Related commands
• portal enable
• portal web-server
• server-detect (portal Web server view)
ip
Use ip to specify the IP address of an IPv4 portal authentication server.
Use undo ip to delete the IP address of the IPv4 portal authentication server.
Syntax
ip ipv4-address [ vpn-instance vpn-instance-name ] [ key { cipher | simple } key-string ]
undo ip
Default
The IP address of the IPv4 portal authentication server is not specified.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IP address of the IPv4 portal authentication server.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN where the portal authentication server
resides by the VPN instance name, a case-sensitive string of 1 to 31 characters. If the portal
authentication server is on the public network, do not specify this option.
key: Specifies a shared key for communication with the portal authentication server. Portal packets
exchanged between the access device and the portal authentication server carry an authenticator that is
generated with the shared key. The receiver uses the authenticator to check the correctness of the
received portal packets.