HP MSR2000/3000/4000 Router Series Security Command Reference

37
lan-access: Authorizes the user to use the LAN access service. The users are mainly Ethernet users, for
example, 802.1X users.
ssh: Authorizes the user to use the SSH service.
telnet: Authorizes the user to use the Telnet service.
terminal: Authorizes the user to use the terminal service and log in from a console, AUX, or async port.
portal: Authorizes the user to use the portal service.
ppp: Authorizes the user to use the PPP service.
Usage guidelines
You can assign multiple service types to a user.
Examples
# Authorize the device management user user1 to use the Telnet and FTP services.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] service-type telnet
[Sysname-luser-manage-user1] service-type ftp
Related commands
display local-user
state (local user view)
Use state to set the status of a local user.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
A local user is in active state.
Views
Local user view
Predefined user roles
network-admin
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network services.
Usage guidelines
This command only applies to the local user. It affects no other users.
Examples
# Place the device management user user1 in blocked state.
<Sysname> system-view