HP MSR2000/3000/4000 Router Series Security Command Reference

64
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
Default
Traffic is counted in bytes and packets.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
data { byte | giga-byte | kilo-byte | mega-byte }: Specifies the unit for data flows, which can be byte,
kilobyte, megabyte, or gigabyte.
packet { giga-packet | kilo-packet | mega-packet | one-packet }: Specifies the unit for data packets,
which can be one-packet, kilo-packet, mega-packet, or giga-packet.
Usage guidelines
The data flow and packet measurement units for traffic statistics must be the same as configured on the
HWTACACS accounting servers. Otherwise, accounting results might be incorrect.
Examples
# In HWTACACS scheme hwt1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet
Related commands
display hwtacacs scheme
display hwtacacs scheme
Use display hwtacacs scheme to display the configuration or statistics of HWTACACS schemes.
Syntax
display hwtacacs scheme [ hwtacacs-scheme-name [ statistics ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to
32 characters.