HP MSR2000/3000/4000 Router Series Security Configuration Guide

257
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an application
group and enter
application group view.
app-group group-name N/A
3. (Optional.) Configure a
description for the
user-defined application
group.
description group-description
By default, the description is
"User-defined application group."
4. Add an application
protocol to the group.
include application app-name
By default, the user-defined application
group does not contain any application
protocol.
Execute this command multiple times to
add multiple application protocols to
the group.
If the specified application protocol
does not exist, the device creates the
protocol.
5. Copy all application
protocols from another
group to the group.
copy app-group group-name
Execute this command multiple times to
copy application protocols from
multiple groups to the current group.
Enabling application statistics on an interface
After the application statistics function is enabled on an interface, the device counts separately the
number of packets or bytes that the interface has received or sent for each application protocol. It also
calculates the port rates for these protocols.
To display application statistics, use the display application statistics command.
To enable the application statistics function on an interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 3 interface view.
interface interface-type
interface-number
N/A
3. Enable application statistics
on an interface.
application statistics enable
[ inbound | outbound ]
By default, this function is disabled.
You can enable the application
statistics function on both the
inbound and outbound directions
of the interface.