HP MSR2000/3000/4000 Router Series Security Configuration Guide

258
Displaying and maintaining APR
Execute display commands in any view and reset commands in user view.
Task Command
Display information about application
protocols.
display application [ name app-name | pre-defined |
user-defined ]
Display information about application
groups.
display app-group [ name group-name | pre-defined |
user-defined ]
Display statistics for the specified application
protocols (MSR2000/MSR3000).
display application statistics [ direction { inbound | outbound }
| interface interface-type interface-number | name app-name ]
*
Display statistics for the specified application
protocols (MSR4000).
display application statistics [ direction { inbound | outbound }
| interface interface-type interface-number [ slot slot-number ] |
name app-name ] *
Display statistics for application protocols on
an interface in descending order based on
the specified criteria
(MSR2000/MSR3000).
display application statistics top N { bps | bytes | packets |
pps } interface interface-type interface-number
Display statistics for application protocols on
an interface in descending order based on
the specified criteria (MSR4000).
display application statistics top N { bps | bytes | packets |
pps } interface interface-type interface-number [ slot
slot-number ]
Display the pre-defined port mappings. display port-mapping pre-defined
Display the user-defined port mappings.
display port-mapping user-defined [ application
application-name | port port-number ]
Clear application statistics for an interface or
all interfaces.
reset application statistics [ interface interface-type
interface-number ]
APR configuration example
Network requirements
As shown in Figure 74, configure APR on the router to recognize the HTTP packets sent by the host and
destined for port 8080.
The router drops the packets recognized by APR.
Figure 74 Network diagram