HP MSR2000/3000/4000 Router Series Security Configuration Guide

329
Figure 100 Portal authentication server configuration
2. Configure the IP address group:
a. Select User Access Manager > Portal Service > IP Group from the navigation tree to enter the
portal IP address group configuration page.
b. Click Add to enter the page shown in Figure 101.
c. Enter the IP group name.
d. Enter the start IP address and end IP add
ress of the IP group.
Make sure the host IP address is in the IP group.
e. Select a service group.
This example uses the default group Ungrouped.
f. Select the IP group type Normal.
g. Click OK.
Figure 101 Adding an IP address group
3. Add a portal device:
a. Select User Access Manager > Portal Service > Device from the navigation tree to enter the
portal device configuration page.
b. Click Add to enter the page shown in Figure 102.