HP MSR2000/3000/4000 Router Series Voice Command Reference

96
dial-program
Use dial-program to enter dial program view.
Use undo dial-program to remove all the settings from dial program view.
Syntax
dial-program
undo dial-program
Views
Voice view
Predefined user roles
network-admin
Examples
# Enter dial program view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
dot-match
Use dot-match to configure a dot match rule.
Use undo dot-match to restore the default.
Syntax
dot-match { end-only | left-right | right-left }
undo dot-match
Default
The dot match rule is end-only.
Views
Number-substitute view
Predefined user roles
network-admin
Parameters
end-only: Matches the digits that correspond to the ending dots (.) in the input template.
left-right: Matches from left to right the digits that correspond to the dots in the input template. The
number of matching digits is the number of dots in the output template.
right-left: Matches from right to left the digits that correspond to the dots in the input template. The
number of matching digits is the number of dots in the output template.
NOTE:
The input and output templates are configured using the rule command.