HP MSR2000/3000/4000 Router Series Voice Command Reference

5
undo calling-name
Default
No calling name is configured.
Views
FXS interface view
Predefined user roles
network-admin
Parameters
text: Specifies a calling name, a case-sensitive string of 1 to 50 characters.
Usage guidelines
The calling name can be sent only in the multiple-data-message format.
Use this command on the originating device.
Examples
# Configure the calling name as tony for FXS interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] calling-name tony
Related commands
• cid display
• cid send
• cid type
cable
Use cable to configure the cable type for an E&M interface.
Use undo cable to restore the default.
Syntax
cable { 2-wire | 4-wire }
undo cable
Default
The cable type is 4-wire.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
2-wire: Specifies the 2-wire cable type, which provides full-duplex voice transmission. Each wire carries
bidirectional signals.