HP MSR2000/3000/4000 Router Series Voice Command Reference

107
Related commands
match-template
subscriber-group
Use subscriber-group to create a subscriber group and enter subscriber group view.
Use undo subscriber-group to delete a subscriber group or all subscriber groups.
Syntax
subscriber-group group-id
undo subscriber-group { group-id | all }
Default
No subscriber group is created.
Views
Voice dial program view
Predefined user roles
network-admin
Parameters
group-id: Specifies a subscriber group ID in the range of 1 to 2147483647.
all: Specifies all subscriber groups.
Usage guidelines
You can create up to ten subscriber groups
Examples
# Create subscriber group 1 and enter subscriber group view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] subscriber-group 1
[Sysname-voice-dial-group1]
substitute (voice entity view)
Use substitute to apply a number substitution rule list to the calling or called numbers on a voice entity.
Use undo substitute to remove the application.
Syntax
substitute { called | calling } list-number
undo substitute { called | calling }
Default
No number substitution rule list is applied to a voice entity. That is, the voice entity does not perform
number substitution.