HP MSR2000/3000/4000 Router Series Voice Command Reference

116
Field Descri
p
tion
Status
State of the phone number, including:
• Offline.
• Online.
• Login.
• Logout.
• DNS-in—DNS query is being performed before the number is registered.
• DNS-out—DNS query is being performed before the number is
deregistered.
min-se
Use min-se to set the maximum and minimum session expiration timers.
Use undo min-se to restore the default.
Syntax
min-se time [ session-expires interval ]
undo min-se
Default
Both the maximum and minimum session expiration timers are set to 1800 seconds.
Views
SIP view
Predefined user roles
network-admin
Parameters
time: Specifies the minimum session expiration time in the range of 90 to 65535 seconds. The minimum
session expiration time must not be larger than the maximum session expiration time.
session-expires interval: Specifies the maximum session expiration time in the range of 90 to 65535
seconds. The default maximum session expiration time equals the minimum session expiration time.
Usage guidelines
You can use this command to set the values of the Min-SE and Session-Expires header fields on a UAC.
If you execute this command on a UAS, only the Min-SE header field is set because the UAS copies the
Session-Expires header field from the request to the response.
Examples
# Set the minimum session expiration time to 1000 seconds and the maximum session expiration time to
2000 seconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] min-se 1000 session-expires 2000
Related commands
session refresh