HP MSR2000/3000/4000 Router Series Voice Command Reference

119
Syntax
register-number
undo register-number
Default
After you complete the SIP registration configuration, a POTS entity registers the phone number with the
registrar.
Views
POTS entity view
Predefined user roles
network-admin
Usage guidelines
A registrar cannot store multiple entries for one phone number. Therefore, if multiple POTS entities on a
device have the same phone number, only one POTS entity can register that number with the registrar.
Examples
# Configure POTS entity 10 to deregister the phone number with the registrar.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] match-template 1000
[Sysname-voice-dial-entity10] line 1/0
[Sysname-voice-dial-entity10] undo register-number
Related commands
match-template
registrar
Use registrar to configure registrar information for the SIP UA.
Use undo registrar to remove the registrar information for the SIP UA.
Syntax
registrar registrar-index ip ip-address [ port port-number ] [ expires seconds ] [ refresh-ratio
ratio-percentage ]
undo registrar registrar-index
Default
No registrar information is configured for the SIP UA.
Views
SIP view
Predefined user roles
network-admin