HP MSR2000/3000/4000 Router Series Voice Command Reference

125
SIP status code SIP status description PSTN cause code PSTN cause description
503 Service unavailable. 41 Temporary failure!
504 Server time-out. 102 Recovery on timer expiry!
505 Version Not Supported. 127 Interworking, unspecified!
513 Message Too Large. 127 Interworking, unspecified!
600 Busy everywhere. 17 User busy!
603 Decline. 21 Call rejected!
604 Does not exist anywhere. 1
Unallocated (unassigned)
number!
606 Not acceptable. 58
Bearer capability not presently
available!
Views
SIP view
Predefined user roles
network-admin
Parameters
sip-code: Specifies a SIP status code in Table 25.
pstn-code: Specifies a PSTN cause code in Table 25.
Examples
# Map the SIP status code 486 to the PSTN cause code 18.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] set sip-status 486 pstn-cause 18
sip
Use sip to enter SIP view.
Use undo sip to remove the settings from SIP view.
Syntax
sip
undo sip
Views
Voice view
Predefined user roles
network-admin
Examples
# Enter SIP view.