4000 Router Series Voice Command Reference

132

Call services commands

call-forwarding

Use call-forwarding to configure call forwarding.

Use undo call-forwarding to restore the default.

Syntax

call-forwarding { no-reply | on-busy | unavailable | unconditional } number number

undo call-forwarding { no-reply | on-busy | unavailable | unconditional }

Default

Call forwarding is disabled.

Views

POTS voice entity view

Predefined user roles

network-admin

mdc-admin

Parameters

no-reply: Enables call forwarding no reply.

on-busy: Enables call forwarding busy.

unavailable: Enables call forwarding unavailable.

unconditional: Enables call forwarding unconditional.

number number: Specifies a forwarded-to number, a string of 1 to 31 digits, 0 through 9.

Usage guidelines

The unconditional, unavailable, on-busy, and no-reply call forwarding types can be configured at the

same time and have a descending order of priority.

Before configuring call forwarding, make sure the initiator can reach the final recipient.

This command takes effect only when the voice interface to which the POTS voice entity is bound is an

FXS interface.

You need to correctly plan forwarded-to number to avoid incorrect numbers and circular calls.

A call can be forwarded for a maximum of five times.

Examples

# Enable call forwarding no reply and set the forwarded-to number to 12345678.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] entity 10 pots