HP MSR2000/3000/4000 Router Series Voice Command Reference

8
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] cid ring 0
cid send
Use cid send to enable CID sending on an FXS or FXO interface.
Use undo cid send to disable CID sending.
Syntax
cid send
undo cid send
Default
CID sending is enabled on an FXS or FXO interface.
Views
FXS interface view, FXO interface view
Predefined user roles
network-admin
Usage guidelines
CID sending must be enabled for the CID function to work correctly.
Examples
# Enable CID sending on voice interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] cid send
cid type
Use cid type to configure the CID format on an FXS interface.
Use undo cid type to restore the default.
Syntax
cid type { complex | simple }
undo cid type
Default
An FXS interface uses the multiple data message format (MDMF) to send CID.
Views
FXS interface view
Predefined user roles
network-admin
Parameters
complex: Specifies MDMF.