4000 Router Series Voice Command Reference

time4: Specifies the break time for the second make-to-break ratio in milliseconds. The value range is 0

and 30 to 8191. If time1 is set to 0, this argument must be set to 0.

Usage guidelines

This command takes effect only for the progress tones on the local device.

Examples

# Specify the call progress tones of US.

<Sysname> system-view

[sysname] voice-setup

[sysname-voice] cptone country-type us

# Customize the call progress tones.

<Sysname> system-view

[sysname] voice-setup

[sysname-voice] cptone custom busy-tone 0 425 425 350 350 350 350

cptone tone-type

Use cptone tone-type to configure the amplitude of call progress tones.

Use undo cptone tone-type to restore the default.

Syntax

cptone tone-type { all | busy-tone | congestion-tone | dial-tone | ringback-tone | special-dial-tone |

waiting-tone } amplitude value

undo cptone tone-type { all | busy-tone | congestion-tone | dial-tone | ringback-tone |

special-dial-tone | waiting-tone } amplitude

Default

The amplitude is 1000 for busy tones and congestion tones, 400 for dial tones and special dial tones,

and 600 for ringback tones and waiting tones.

Views

Voice view

Predefined user roles

network-admin

Parameters

all: Specifies all types of call progress tones.

busy-tone: Specifies the busy tone.

congestion-tone: Specifies the congestion tone.

dial-tone: Specifies the dial tone.

ringback-tone: Specifies the ringback tone.

special-dial-tone: Specifies the special dial tone.

waiting-tone: Specifies the waiting tone.

amplitude value: Specifies an amplitude in the range of 200 to 1500.