HP MSR2000/3000/4000 Router Series Voice Command Reference

17
Examples
# Set the delay before the originating side sends DTMF tones in immediate start mode to 3000
milliseconds for E&M interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] signal immediate
[Sysname-subscriber-line1/0] delay send-dtmf 3000
Related commands
signal
delay send-wink
Use delay send-wink to configure a delay from when the terminating side receives a seizure signal to
when it sends a wink signal in wink start mode.
Use undo delay send-wink to restore the default.
Syntax
delay send-wink milliseconds
undo delay send-wink
Default
The delay from when the terminating side receives a seizure signal to when it sends a wink signal is 200
milliseconds in wink start mode.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
milliseconds: Specifies the delay in the range of 100 to 5000 milliseconds.
Examples
# Set the delay from when the terminating side receives a seizure signal to when it sends a wink signal
in wink start mode to 700 milliseconds for E&M interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] signal wink
[Sysname-subscriber-line1/0] delay send-wink 700
Related commands
signal
delay start-dial
Use delay start-dial to configure the dial delay time for an FXS interface or FXO interface.
Use undo delay start-dial to restore the default.