HP MSR2000/3000/4000 Router Series Voice Command Reference

18
Syntax
delay start-dial seconds
undo delay start-dial
Default
The dial delay time is 1 second.
Views
FXS interface view, FXO interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the dial delay time in the range of 0 to 10 seconds.
Examples
# Set the dial delay time to 5 seconds for voice interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] delay start-dial 5
delay wink-hold
Use delay wink-hold to configure the duration for which the terminating side sends wink signals in wink
start mode.
Use undo delay wink-hold to restore the default.
Syntax
delay wink-hold milliseconds
undo delay wink-hold
Default
The terminating side sends wink signals for 500 milliseconds in wink start mode.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
milliseconds: Specifies the duration for which the terminating side sends wink signals in wink start mode.
The value range is 100 to 3000 milliseconds.
Examples
# Set the duration to 700 milliseconds for which the terminating side sends wink signals in wink start
mode.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] signal wink