HP MSR2000/3000/4000 Router Series Voice Command Reference

32
Predefined user roles
network-admin
Parameters
country-name: Specifies a country. It can be Australia, Austria, Belgium-Long, Belgium-Short, Brazil,
China, Czech-Republic, Denmark, ETSI-Harmanized, Finland, France, German-Swiss, Greece, Hungary,
India, Italy, Japan, Korea, Mexico, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, U.K.,
US-Loaded-Line, US-Non-Loaded, or US-Special-Service.
r550: 550-ohm real impedance.
r600: 600-ohm real impedance.
r650: 650-ohm real impedance.
r700: 700-ohm real impedance.
r750: 750-ohm real impedance.
r800: 800-ohm real impedance.
r850: 850-ohm real impedance.
r900: 900-ohm real impedance.
r950: 950-ohm real impedance.
Usage guidelines
Each country corresponds to an impedance value. You can specify an impedance value by specifying a
country.
You must configure the same electrical impedance value on the originating and terminating devices.
Examples
# Set the electrical impedance to r600 on voice interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] impedance r600
nlp-on
Use nlp-on to enable the nonlinear function on a voice interface.
Use undo nlp-on to disable the function.
Syntax
nlp-on
undo nlp-on
Default
The EC nonlinear processing function is enabled.
Views
FXO interface view, FXS interface view, E&M interface view
Predefined user roles
network-admin