HP MSR2000/3000/4000 Router Series Voice Command Reference

37
Views
FXO interface view
Predefined user roles
network-admin
Parameters
value: Specifies the frequency value for ring detection, in Hz. The value is in the range 30 to 100 with the
step of 10.
Examples
# Set the frequency value for ring detection on FXO interface 1/0 to 100 Hz.
<sysname> system-view
[sysname] subscriber-line 1/0
[sysname-subscriber-line1/0] ring-detect frequency 100
send-busytone enable
Use send-busytone enable to enable busy tone sending on an FXO interface.
Use undo send-busytone enable to disable busy tone sending.
Syntax
send-busytone enable
undo send-busytone enable
Default
Busy tone sending is disabled.
Views
FXO interface view
Predefined user roles
network-admin
Usage guidelines
If the PBX does not send busy tones, you can configure an FXO interface to send busy tones.
Examples
# Enable FXO interface 1/0 to send busy tones.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] send-busytone enable
Related commands
send-busytone time
send-busytone time
Use send-busytone time to configure the busy tone duration.
Use undo send-busytone time to restore the default.