HP MSR2000/3000/4000 Router Series Voice Command Reference

41
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] slic-gain 1
subscriber-line
Use subscriber-line to enter voice interface view.
Syntax
subscriber-line line-number
Views
System view
Predefined user roles
network-admin
Parameters
line-number: Voice interface number.
Examples
# Enter the view of the voice interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0]
timer dial-interval
Use timer dial-interval to configure the maximum interval for dialing the next digit.
Use undo timer dial-interval to restore the default.
Syntax
timer dial-interval seconds
undo timer dial-interval
Default
The maximum interval for dialing the next digit is 10 seconds.
Views
FXS interface view, FXO interface view, E&M interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the maximum interval for dialing the next digit, in the range of 1 to 300 seconds.
Usage guidelines
This timer restarts each time the subscriber dials a digit. If the timer expires before the subscriber dials the
next digit, the system prompts the subscriber that the dialing times out.
The maximum interval from off-hook to dialing the first digit is set by the timer first-dial command.