HP MSR2000/3000/4000 Router Series Voice Command Reference

42
Examples
# Configure the maximum interval for dialing the next digit to 5 seconds on voice interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer dial-interval 5
timer disconnect-pulse
Use timer disconnect-pulse to configure the LCFO signal duration.
Use undo timer disconnect-pulse to restore the default.
Syntax
timer disconnect-pulse value
undo timer disconnect-pulse
Default
The LCFO signal duration is 750 milliseconds.
Views
FXS interface view
Predefined user roles
network-admin
Parameters
value: Specifies the LCFO signal duration in the range of 1 to 300 seconds in increments of 30.
Examples
# Configure the LCFO signal duration as 90 milliseconds on FXS interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer disconnect-pulse 90
Related commands
disconnect lcfo
timer first-dial
Use timer first-dial to configure the timeout time between off-hook and dialing the first digit.
Use undo timer first-dial to restore the default.
Syntax
timer first-dial seconds
undo timer first-dial
Default
The timeout time between off-hook and dialing the first digit is 10 seconds.