HP MSR2000/3000/4000 Router Series Voice Command Reference

43
Views
FXS interface view, FXO interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the timeout time between off-hook and dialing the first digit, in the range of 1 to 300
seconds.
Usage guidelines
If the timer expires before the subscriber dials the first digit, the system prompts the subscriber that the
dialing times out.
Examples
# Configure the timeout time between off-hook and dialing the first digit as 15 seconds.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer first-dial 15
timer hookflash-detect
Use timer hookflash-detect to configure the hookflash time range.
Use undo timer hookflash-detect to restore the default.
Syntax
timer hookflash-detect hookflash-range
undo timer hookflash-detect
Default
The hookflash time range is 50 to 180 milliseconds.
Views
FXS interface view
Predefined user roles
network-admin
Parameters
hookflash-range: Specifies the hookflash duration range in the range of 50 to 1200 milliseconds. If an
on-hook condition lasts for a period that falls within the specified time range, it is considered a hookflash.
Examples
# Set the hookflash time range to 100 to 200 milliseconds for FXS interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer hookflash-detect 100-200