HP MSR2000/3000/4000 Router Series Voice Command Reference

44
timer hookoff-interval
Use timer hookoff-interval to configure the interval between on-hook and off-hook.
Use undo timer hookoff-interval to restore the default.
Syntax
timer hookoff-interval milliseconds
undo timer hookoff-interval
Default
The interval between on-hook and off-hook is 500 milliseconds.
Views
FXO interface view
Predefined user roles
network-admin
Parameters
milliseconds: Specifies the interval between on-hook and off-hook, in the range of 500 to 4000
milliseconds.
Usage guidelines
The on-hook/off-hook state of the bound FXS and FXO interfaces is consistent. When the FXS interface
goes off-hook, the bound FXO interface must perform an on-hook operation before going off-hook. This
command configures the interval between the on-hook and off-hook.
Examples
# Set the interval from on-hook to off-hook to 600 milliseconds for FXO interface 1/0.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer hookoff-interval 600
Related commands
hookoff-mode delay bind
timer ring-back
Use timer ring-back to configure the maximum duration for playing ringback tones.
Use undo timer ring-back to restore the default.
Syntax
timer ring-back seconds
undo timer ring-back
Default
The maximum duration for playing ringback tones is 60 seconds.
Views
FXS interface view, FXO interface view, E&M interface view