HP MSR2000/3000/4000 Router Series Voice Command Reference

45
Predefined user roles
network-admin
Parameters
seconds: Specifies the maximum duration for playing ringback tones, in the range of 5 to 120 seconds .
Examples
# Configure the maximum duration for playing ringback tones as 8 seconds.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer ring-back 8
timer wait-digit
Use timer wait-digit to configure the timeout time for the terminating device to wait for the first digit.
Use undo timer wait-digit to restore the default.
Syntax
timer wait-digit { seconds | infinity }
undo timer wait-digit
Default
The timeout time for the terminating device to wait for the first digit is 5 seconds.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the timeout time for the terminating device to wait for the first digit, in the range of 3
to 600 seconds.
infinity: Specifies no time limit.
Usage guidelines
If the terminating device does not receive the first digit within the configured timeout time, it plays busy
tones.
Examples
# Configure the timeout time for the terminating device to wait for the first digit as 10 seconds.
<Sysname> system-view
[Sysname] subscriber-line 1/0
[Sysname-subscriber-line1/0] timer wait-digit 10
transmit gain
Use transmit gain to set the output gain value.
Use undo transmit gain to restore the default.