4000 Router Series Voice Command Reference

[Sysname-E1 1/0] cas 0

[Sysname-cas 1/0:0] callmode segment

cas

Use cas to enter R2 CAS view.

Use undo cas to exit R2 CAS view and delete the settings in R2 CAS view.

Syntax

cas ts-set-number

undo cas ts-set-number

Views

E1 interface view, T1 interface view

Predefined user roles

network-admin

Parameters

ts-set-number: Specifies a timeslot set by its number in the range of 0 to 30 for an E1 interface, or in the

range of 0 to 23 for a T1 interface.

Usage guidelines

The timeslot set specified in this command must have been created using the timeslot-set command.

Examples

# Enter the R2 CAS view of timeslot set 5.

<Sysname> system-view

[Sysname] controller e1 1/0

[Sysname-E1 1/0] timeslot-set 5 timeslot-list 1-31 signal r2

[Sysname-E1 1/0] cas 5

[Sysname-cas 1/0:5]

Related commands

timeslot-set

clear-forward-ack enable

Use clear-forward-ack enable to configure the terminating side to send a clear-back signal when the

originating side first disconnects the line.

Use undo clear-forward-ack enable to configure the terminating side to not send a clear-back signal

when the originating side first disconnects the line.

Syntax

clear-forward-ack enable

undo clear-forward-ack enable

Default

The terminating side does not send a clear-back signal when the originating side first disconnects the

line.