4000 Router Series Voice Command Reference

Views

R2 CAS view

Predefined user roles

network-admin

Parameters

max: Selects the timeslot with the greatest number from available timeslots.

maxpoll: Selects the timeslot with the greatest number from available timeslots in the first timeslot polling.

Subsequent pollings select in descending order timeslots with numbers less than the one selected in the

previous polling. Suppose timeslots 31 and 29 are not available. The first polling selects timeslot 30 and

the next polling selects timeslot 28.

min: Selects the timeslot with the smallest number from available timeslots.

minpoll: Selects the timeslot with the lowest number from available timeslots in the first timeslot polling.

Subsequent pollings select in ascending order timeslots with numbers greater than the one selected in the

previous polling. Suppose timeslots 1 and 3 are not available. The first polling selects timeslot 2 and in

the next polling selects timeslot 4.

Examples

# Configure the routing mode as maxpoll for timeslot set 0 on interface E1 1/0.

<Sysname> system-view

[Sysname] controller e1 1/0

[Sysname-E1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2

[Sysname-E1 1/0] cas 0

[Sysname-cas 1/0:0] select-mode maxpoll

seizure-ack enable

Use seizure-ack enable to configure the originating side to require the terminating side to send seizure

acknowledgement signals.

Use undo seizure-ack enable to configure the originating side to not require the terminating side to send

seizure acknowledgement signals.

Syntax

seizure-ack enable

undo seizure-ack enable

Default

The originating side requires the terminating side to send seizure acknowledgement signals.

Views

R2 CAS view

Predefined user roles

network-admin

Usage guidelines

R2 line signaling in some countries requires the terminating side to not acknowledge received seizure

signals. To meet this requirement, execute the undo seizure-ack enable command.