4000 Router Series Voice Command Reference

Examples

# Configure the originating side to not require the terminating side to send seizure acknowledgement

signals.

<Sysname> system-view

[Sysname] controller e1 1/0

[Sysname-E1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2

[Sysname-E1 1/0] cas 0

[Sysname-cas 1/0:0] undo seizure-ack enable

send ringbusy enable

Use send ringbusy enable to configure the terminating side to send busy tones to the originating side.

Use undo send ringbusy enable to configure the terminating side to not send busy tones to the originating

side.

Syntax

send ringbusy enable

undo send ringbusy enable

Default

The terminating side sends busy tones to the originating side.

Views

R2 CAS view

Predefined user roles

network-admin

Usage guidelines

If the originating side needs to play busy tones, you can execute the undo send ringbusy enable

command on the terminating device.

Examples

# Configure the terminating side to send busy tones to the originating side.

<Sysname> system-view

[Sysname] controller e1 1/0

[Sysname-E1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2

[Sysname-E1 1/0] cas 0

[Sysname-cas 1/0:0] send ringbusy enable

Related commands

timer ringbusy

special-character

Use special-character to configure a signal code for a special character.

Use undo special-character to remove the configured signal code.